Standard Operating Procedure for QA Involvement in Tablet Packaging Line Validation

Department	Tablet
SOP No.	SOP/TAB/225/2025
Supersedes	SOP/TAB/225/2022
Page No.	Page 1 of 5
Issue Date	01/03/2026
Effective Date	06/03/2026
Review Date	01/03/2027

1. Purpose

The purpose of this SOP is to outline the steps for ensuring Quality Assurance (QA) involvement in the validation of tablet packaging lines. This SOP ensures that the packaging lines are validated to meet the required standards for product integrity, regulatory compliance, and operational efficiency.

2. Scope

This SOP applies to the validation of all tablet packaging lines, including equipment used for blister packing, strip packing, cartoning, and labeling. It covers the entire validation process, from initial setup to final approval.

3. Responsibilities

• QA Manager: Responsible for overseeing the entire packaging line validation process and ensuring compliance with regulatory requirements and internal quality standards.
• Production Team: Responsible for carrying out the validation activities on the packaging line as per the approved protocols and providing support for troubleshooting and adjustments.
• Engineering Team: Responsible for ensuring that the equipment is properly installed, calibrated, and maintained during the validation process.
• Regulatory Affairs Team: Responsible for ensuring that the validation process meets all regulatory requirements and providing support for compliance documentation.

4. Accountability

The QA Manager is accountable for ensuring that all QA-related aspects of packaging line validation are followed. The Production and Engineering teams are responsible for executing the validation steps and providing documentation of results.

5. Procedure

5.1 Pre-Validation Preparation

1. Review the packaging line layout, including all relevant equipment (e.g., blister machines, cartoners, labeling machines) and packaging materials (Annexure-1).
2. Ensure that all necessary equipment and systems are in place and calibrated according to manufacturer specifications.
3. Ensure that standard operating procedures (SOPs) for each piece of equipment are available and up-to-date (Annexure-2).
4. Ensure that the validation team is trained and all required documentation is ready for review (Annexure-3).

5.2 Packaging Line Setup and Installation

1. Verify that the packaging line setup follows the manufacturer’s installation guidelines and meets all specifications (Annexure-4).
2. Check all utilities (electricity, compressed air, etc.) to ensure proper functioning and safety of the equipment.
3. Verify that the line layout is appropriate for efficient production flow and that equipment is accessible for routine maintenance (Annexure-5).
4. Ensure that all line-specific documentation (e.g., installation records, calibration certificates) is completed (Annexure-6).

5.3 Operational Qualification (OQ)

1. Verify that the packaging line operates as per the defined parameters, including speed, throughput, labeling accuracy, and sealing integrity (Annexure-7).
2. Test all packaging line functions to ensure they meet predefined operational limits (e.g., weight variation, blister integrity, print accuracy) (Annexure-8).
3. Document all test results, deviations, and corrective actions taken (Annexure-9).

5.4 Performance Qualification (PQ)

1. Verify the consistency of packaging performance under typical operating conditions over an extended run (e.g., 3-5 consecutive batches) (Annexure-10).
2. Monitor key performance indicators, such as batch-to-batch consistency, packaging material waste, and downtime (Annexure-11).
3. Ensure that the packaging line can consistently produce products that meet the required quality standards (e.g., packaging appearance, correct labeling, and integrity of seals) (Annexure-12).

5.5 Documentation and Record Keeping

1. Ensure that all packaging line qualification records, including IQ, OQ, and PQ documents, are complete, signed, and filed (Annexure-13).
2. Ensure that all deviations are documented with corrective actions taken and that these records are maintained according to GMP requirements (Annexure-14).
3. Store all documentation for a minimum of 5 years or as required by applicable regulations.

5.6 Approval and Final Review

1. Once all validation steps are complete, the QA Manager shall review the qualification documentation for completeness and compliance (Annexure-15).
2. Upon approval, the final report shall be signed off by the QA Manager and the Production Manager (Annexure-16).
3. Any outstanding issues or deviations must be resolved before the final approval can be granted.

5.7 Requalification and Ongoing Monitoring

1. Requalification of the packaging line must be performed after any major modifications or upgrades to the equipment or processes (Annexure-17).
2. Monitor packaging line performance regularly to ensure continued compliance with specifications and quality standards (Annexure-18).
3. Document any requalification activities, adjustments, or improvements made during routine operations (Annexure-19).

6. Abbreviations

• SOP: Standard Operating Procedure
• QA: Quality Assurance
• OQ: Operational Qualification
• PQ: Performance Qualification
• IQ: Installation Qualification
• GMP: Good Manufacturing Practice

7. Documents

1. Packaging Line Qualification Report (Annexure-1)
2. Equipment SOPs (Annexure-2)
3. Qualification Documentation Checklist (Annexure-3)
4. Installation Qualification Checklist (Annexure-4)
5. Operational Qualification Test Plan (Annexure-5)
6. Operational Qualification Results (Annexure-6)
7. Performance Qualification Plan (Annexure-7)
8. Performance Qualification Results (Annexure-8)
9. Documentation of Deviations (Annexure-9)
10. Performance Monitoring Log (Annexure-10)
11. Requalification Documentation Log (Annexure-11)
12. Packaging Line Requalification Results (Annexure-12)
13. Final Qualification Approval Log (Annexure-13)

8. References

• 21 CFR Part 211 – Current Good Manufacturing Practice for Finished Pharmaceuticals (US FDA)
• ISO 9001 – Quality Management Systems
• GMP Guidelines for Pharmaceutical Manufacturing

9. SOP Version

Version: 2.0

10. Approval Section

	Prepared By	Checked By	Approved By
Signature
Date
Name
Designation
Department

11. Annexures

Annexure-1: Packaging Line Qualification Report

Equipment	Model	Serial Number	Manufacturer	Qualification Date
Blister Packaging Machine	Model X	12345	XYZ Pharma	01/03/2026

Annexure-2: Equipment SOPs

Equipment	SOP Number	Version	Reviewed By	Review Date
Blister Machine	SOP/TAB/101	2.0	John Smith	01/03/2026

Annexure-3: Qualification Documentation Checklist

Document Type	Complete	Remarks
Qualification Report	Yes	Complete and reviewed

Revision History:

Revision Date	Revision No.	Revision Details	Reason for Revision	Approved By
01/01/2024	1.0	Initial SOP creation	New process	QA Head
01/02/2025	2.0	Added requalification and ongoing monitoring procedures	Process improvement	QA Head