Standard Operating Procedure for Handling and Disposal of Waste in Gels Production
1) Purpose
The purpose of this SOP is to establish procedures for the safe handling, segregation, and disposal of waste generated during the production of gels to minimize environmental impact and ensure compliance with regulatory requirements.
2) Scope
This SOP applies to all personnel involved in waste management within the pharmaceutical manufacturing facility where gels are produced.
3) Responsibilities
Environmental Health and Safety (EHS) Manager: Oversee waste management procedures and compliance with environmental regulations.
Production Operators: Segregate and handle waste according to this SOP.
Facility Maintenance Staff: Assist in waste disposal activities and ensure proper functioning of waste management systems.
4) Procedure
4.1 Waste Segregation
4.1.1 Segregate waste at the point of generation into categories (e.g., general, hazardous, recyclable).
4.1.2 Use color-coded bins or containers for easy identification and segregation.
4.2 Waste Collection
4.2.1 Collect segregated waste in designated containers or bins labeled with waste type and hazard classification.
4.2.2 Ensure containers are properly sealed and stored in designated storage areas.
4.3 Handling Procedures 4.4 Disposal Methods 4.5 Emergency Response 4.6 Documentation and Records SOP: Standard Operating Procedure – Waste Management Logbook – EPA Regulations on Hazardous Waste Management Version 1.0
4.3.1 Handle hazardous waste with appropriate PPE and according to safety data sheet (SDS) instructions.
4.4.1 Dispose of non-hazardous waste through approved waste management vendors or recycling programs.
4.4.2 Arrange for the safe disposal of hazardous waste through licensed waste disposal contractors.
4.5.1 Establish procedures for responding to spills, leaks, or accidents involving waste materials.
4.5.2 Train personnel on emergency response protocols and evacuation procedures if necessary.
4.6.1 Maintain records of waste generation, segregation, collection, and disposal activities.
4.6.2 Document incidents, spills, and corrective actions related to waste management.5) Abbreviations, if any
EHS: Environmental Health and Safety
PPE: Personal Protective Equipment
SDS: Safety Data Sheet6) Documents, if any
– Hazardous Waste Manifests
– Training Records for Waste Handling7) Reference, if any
– OSHA Guidelines for Hazardous Waste Operations and Emergency Response (HAZWOPER)
– Local regulations on waste disposal and environmental protection8) SOP Version