Energy Control Procedures in MDI Production

1) Purpose

The purpose of this SOP is to establish energy control procedures in metered-dose inhaler (MDI) production to ensure the safety of personnel during maintenance, repair, or adjustment of energy sources and equipment.

2) Scope

This SOP applies to all personnel involved in energy control activities within the MDI production facility, including maintenance technicians, production supervisors, and safety officers.

3) Responsibilities

The responsibilities for this SOP include implementing lockout/tagout procedures, conducting energy isolation, verifying energy sources, and ensuring compliance with safety protocols. Specific roles include:
Maintenance Technicians: Perform energy control procedures and maintain lockout/tagout devices.
Production Supervisors: Oversee energy isolation and authorize equipment shutdown for maintenance.
Safety Officers: Monitor compliance with energy control procedures and conduct periodic audits.

4) Procedure

4.1 Energy Control Planning
4.1.1 Identify energy sources (e.g., electrical, mechanical, hydraulic) requiring control during maintenance activities.
4.1.2 Develop energy control plans outlining procedures, responsibilities, and equipment requirements.
4.2 Lockout/Tagout Procedures
4.2.1 Obtain authorization and notify affected personnel before energy isolation.
4.2.2 Apply lockout/tagout devices to energy isolation points to prevent accidental startup.
4.3 Verification of Energy Isolation