Skip to content
  • Clinical Studies
  • Schedule M
  • Stability Studies
  • Pharma GMP
  • Pharma Tips
  • Pharma Books
  • Pharma Validation
  • Pharma Regulatory

SOP Guide for Pharma

The Ultimate Resource for Pharmaceutical SOPs and Best Practices

  • Home
  • Job Safety Analysis (JSA)
    • Oral Dosage Forms (Tablets & Capsules)
    • Oral Liquid Dosage Forms (Syrups, Elixirs, Suspensions, Emulsions)
    • Powder and Granule Dosage Forms
    • Topical Dosage Forms (Creams, Ointments, Gels, Lotions, Pastes)
    • Transdermal Dosage Forms (Patches)
  • Standard Test Procedures (STP)
  • SOP – Blog Post
  • Toggle search form

SOP for Endotoxin Testing in Injectable Products

Posted on By

SOP for Endotoxin Testing in Injectable Products

Procedure for Endotoxin Testing in Injectable Products

1) Purpose

The purpose of this SOP is to outline the procedure for conducting endotoxin testing on injectable products to ensure compliance with regulatory requirements and patient safety.

2) Scope

This SOP applies to all injectable products manufactured within the facility that require endotoxin testing.

3) Responsibilities

Quality Control (QC) Department: Responsible for conducting endotoxin testing and ensuring compliance with this SOP.
Production Department: Responsible for providing samples and supporting QC during testing.

4) Procedure

4.1 Equipment Preparation:
    4.1.1 Set up the endotoxin testing system according to the manufacturer’s instructions.
    4.1.2 Ensure all equipment, including the endotoxin-specific reagents, is properly calibrated and verified.
    4.1.3 Prepare the standard endotoxin solutions as required for validation.

See also  SOP for Adhesion Testing in Transdermal Patches

4.2 Sample Preparation:
    4.2.1 Obtain the injectable product samples from the production department.
    4.2.2 Dilute the samples appropriately if necessary, ensuring compatibility with the testing method.
    4.2.3 Handle samples aseptically to avoid contamination.

4.3 Endotoxin Testing Procedure:
    4.3.1 Perform the endotoxin testing according to the validated method (e.g., gel-clot, turbidimetric, chromogenic).
    4.3.2 Incubate the test samples with the endotoxin reagent under controlled conditions.
    4.3.3 Measure and record the reaction endpoint using appropriate instrumentation or visual assessment.
    4.3.4 Include appropriate positive and negative controls in

each test run.

4.4 Calculation and Interpretation:
    4.4.1 Calculate the endotoxin concentration in the samples based on the standard curve or reference preparation.
    4.4.2 Compare the measured endotoxin levels against acceptance criteria specified in pharmacopeial standards or internal specifications.
    4.4.3 Document and investigate any deviations from expected results, taking corrective actions as necessary.

See also  SOP for Viscosity Testing in Oral Liquids

4.5 Acceptance Criteria:
    4.5.1 Endotoxin levels in injectable products should not exceed the specified limits for safe administration.
    4.5.2 Ensure that all controls demonstrate appropriate responses within established limits.

4.6 Documentation:
    4.6.1 Record all endotoxin testing results, including method validation data, in the Endotoxin Testing Record.
    4.6.2 Maintain accurate records of sample preparation, testing conditions, and any deviations encountered.
    4.6.3 Review and approve the documentation by QC Manager.

5) Abbreviations, if any

QC: Quality Control

6) Documents, if any

Endotoxin Testing Record
Method Validation Report for Endotoxin Testing
Sampling Plan Document

7) Reference, if any

USP General Chapter <85> – Bacterial Endotoxins Test
21 CFR Part 211 – Current Good Manufacturing Practice for Finished Pharmaceuticals

See also  SOP for pH Measurement of Solutions

8) SOP Version

Version 1.0

In-Process Control Tags:Blend uniformity testing SOP, Bulk density testing SOP, Capsule content uniformity SOP, Capsule disintegration testing SOP, Capsule dissolution testing SOP, Capsule weight variation SOP, Clarity and opalescence testing of liquids SOP, Endotoxin testing in injectable products SOP, Flowability testing of powders SOP, Granulation size distribution SOP, Moisture content determination in granules SOP, Osmolality testing SOP, Particulate matter testing in liquids SOP, pH measurement of solutions SOP, Pyrogen testing SOP, Specific gravity testing of liquids SOP, Sterility testing SOP, Tablet disintegration testing SOP, Tablet dissolution testing SOP, Tablet friability testing SOP, Tablet hardness testing SOP, Tablet thickness measurement SOP, Tablet weight variation SOP, Uniformity of dosage units SOP, Viscosity testing of liquids SOP

Post navigation

Previous Post: SOP for Investigation and CAPA in Ointment Formulation
Next Post: SOP for Cleaning and Sanitation: Procedures for Cleaning and Sanitizing Equipment and Facilities

Standard Operating Procedures V 1.0

  • Aerosols
  • Analytical Method Development
  • Bioequivalence Bioavailability Study
  • Capsule Formulation
  • Clinical Studies
  • Creams
  • Data Integrity
  • Dental Dosage Forms
  • Drug Discovery
  • Environment, Health and Safety
  • Formulation Development
  • Gels
  • Good Distribution Practice
  • Good Warehousing Practices
  • In-Process Control
  • Injectables
  • Liquid Orals
  • Liposome and Emulsion Formulations
  • Lotions
  • Lyophilized Products
  • Maintenance Dept.
  • Medical Devices
  • Metered-Dose Inhaler
  • Microbiology Testing
  • Nanoparticle Formulation
  • Nasal Spray Formulations
  • Nebulizers
  • Ocular (Eye) Dosage Forms
  • Ointments
  • Otic (Ear) Dosage Forms
  • Pharmacovigilance
  • Powder & Granules
  • Purchase Departments
  • Quality Assurance
  • Quality Control
  • Raw Material Stores
  • Regulatory Affairs
  • Tablet Manufacturing
  • Rectal Dosage Forms
  • Transdermal Patches
  • Vaginal Dosage Forms
  • Validations and Qualifications

Read SOPs in your Language:

 - 
Bengali
 - 
bn
English
 - 
en
Gujarati
 - 
gu
Hindi
 - 
hi
Malayalam
 - 
ml
Marathi
 - 
mr
Punjabi
 - 
pa
Tamil
 - 
ta
Telugu
 - 
te

NEW! Revised SOPs – V 2.0

  • Aerosols V 2.0
  • Analytical Method Development V 2.0
  • API Manufacturing V 2.0
  • BA-BE Studies V 2.0
  • Biosimilars V 2.0
  • Capsules V 2.0
  • Creams V 2.0
  • Elixers V 2.0
  • Ointments V 2.0
  • Raw Material Warehouse V 2.0
  • Tablet Manufacturing V2.0

New Publication: A must for All.

Copyright © 2025 SOP Guide for Pharma.

Powered by PressBook WordPress theme

Go to mobile version