Standard Operating Procedure for Cleaning of Dehumidifier

1. Purpose

The purpose of this SOP is to provide guidelines for the proper cleaning and maintenance of the dehumidifier in order to maintain a controlled environment in compliance with pharmaceutical industry standards.

2. Scope

This SOP applies to all personnel responsible for the operation and maintenance of the dehumidifier within the pharmaceutical facility.

3. Responsibilities

• 3.1 Operator: Responsible for conducting routine cleaning of the dehumidifier.
• 3.2 Supervisor: Responsible for overseeing and ensuring compliance with this SOP.
• 3.3 Maintenance Team: Responsible for any major repairs or servicing of the dehumidifier.

4. Procedure

Follow these steps for the proper cleaning of the dehumidifier:

4.1 Ensure the dehumidifier is powered off and disconnected from the electrical supply.

4.2 Put on appropriate personal protective equipment (PPE), including gloves and safety goggles.

4.3 Remove and dispose of any air filters or pre-filters according to waste disposal procedures.

4.4 Use a soft, lint-free cloth or sponge dampened with a mild detergent solution to wipe down the interior and exterior surfaces of the dehumidifier.

4.5 Pay special attention to areas prone to dust and dirt accumulation, such as coils and fans.

4.6 Rinse the cloth or sponge thoroughly and wipe down all surfaces again to remove any detergent residue.

4.7 Allow all cleaned components to air