Ointments: SOP for Photostability Testing of Ointments – V 2.0

Posted on By

SOP for Photostability Testing of Ointments – V 2.0

Procedure for Photostability Testing of Ointments

Department Quality Control (QC)/Quality Assurance (QA)/Research & Development (R&D)
SOP No. SOP/Ointment/104
Supersedes V 1.0
Page No. Page X of Y
Issue Date [Insert Issue Date]
Effective Date [Insert Effective Date]
Review Date [Insert Review Date]

1. Purpose

The purpose of this Standard Operating Procedure (SOP) is to define the process for conducting photostability testing of ointments to assess their physical, chemical, and microbiological stability when exposed to light. This ensures that the formulation remains stable under normal and intense light exposure conditions.

2. Scope

This SOP applies to all personnel in the Quality Control (QC), Quality Assurance (QA), and Research & Development (R&D) departments responsible for executing, monitoring, and documenting photostability studies.

3. Responsibilities

  • QC Analyst: Conducts photostability testing at predefined intervals.
  • QC Supervisor: Ensures compliance with the photostability study protocol.
  • QA Officer: Reviews and approves photostability test results.
  • R&D Scientist: Interprets data trends and suggests formulation improvements if required.
  • QA Manager: Approves photostability study protocols and ensures regulatory adherence.
See also  Ointments: SOP for Handling Revalidation Requirements - V 2.0

4. Accountability

The QA and QC Managers are accountable for ensuring compliance with ICH Q1B guidelines for photostability testing.

5. Procedure

5.1 Preparation for Photostability Testing

  • Ensure the photostability study protocol is approved before initiation.
  • Select representative ointment batches for testing.
  • Label stability samples with batch number, manufacturing date, and study conditions.
  • Use both protected and unprotected samples to assess the effect of light exposure.

5.2 Light Exposure Conditions

  • Use a light chamber complying with ICH Q1B standards.
  • Ensure total exposure to a minimum of:
    • 1.2 million lux hours for visible light.
    • 200 watt-hours/m² for near-ultraviolet (UV) light.
  • Control temperature within 25°C ± 2°C and relative humidity at 60% ± 5% RH.

5.3 Stability Testing Parameters

  • Physical Properties: Observe changes in color, texture, phase separation, or liquefaction.
  • Chemical Stability: Analyze the active ingredient content and degradation products.
  • Microbiological Testing: Perform microbial limit tests to detect contamination.
  • pH Measurement: Determine the impact of light exposure on pH values.
  • Viscosity Analysis: Evaluate changes in consistency and spreadability.
See also  Ointments: SOP for Stability Testing Under Accelerated Conditions - V 2.0

5.4 Sampling Intervals

  • Collect stability samples at predefined intervals: 0, 3, 6, 9, and 12 months.
  • Perform all tests as per the photostability study protocol.
  • Document all test results in the Stability Testing Log.

5.5 Handling Out-of-Specification (OOS) Results

  • Identify any deviations from the acceptance criteria.
  • Initiate an Out-of-Specification (OOS) investigation if required.
  • Implement corrective and preventive actions (CAPA) if necessary.

5.6 Documentation and Data Analysis

  • Record all test results in the Photostability Study Report.
  • Ensure data integrity and traceability.
  • QA must approve photostability data before finalizing the report.

6. Abbreviations

  • GMP – Good Manufacturing Practices
  • QA – Quality Assurance
  • QC – Quality Control
  • ICH – International Council for Harmonisation
  • RH – Relative Humidity
  • OOS – Out-of-Specification

7. Documents

  • Stability Testing Log (Annexure-1)
  • Photostability Study Report (Annexure-2)
See also  Ointments: SOP for Conducting On-the-Spot Microbial Testing - V 2.0

8. References

  • ICH Q1B Stability Testing: Photostability Testing of New Drug Substances and Products
  • WHO GMP Guidelines for Pharmaceutical Stability Studies

9. SOP Version

Version 2.0

10. Approval Section

Prepared By Checked By Approved By
Signature
Date
Name
Designation
Department

11. Annexures

Annexure-1: Stability Testing Log

Date Batch Number Storage Condition Testing Interval Parameter Tested Result Reviewed By
01/02/2025 OINT-401 1.2M lux hrs 6 Months Color Stability Compliant QA Officer
01/08/2025 OINT-401 1.2M lux hrs 12 Months Assay Stable QA Officer

Annexure-2: Photostability Study Report

Batch Number Study Start Date Study End Date Test Parameters Results Final Conclusion
OINT-401 01/02/2025 01/02/2026 pH, Viscosity, Microbial Limits Compliant Meets Stability Criteria
OINT-402 01/03/2025 01/03/2026 Appearance, Assay, Microbial Limits Compliant Meets Stability Criteria

12. Revision History:

Revision Date Revision No. Details of Revision Reason for Revision Approved By
01/01/2024 1.0 Initial Version New SOP QA Head
01/02/2025 2.0 Updated SOP Format Standardization of Document QA Head
Ointments V 2.0 Tags:, , , , , , , , , , , , , , , , , , , , , , , ,