SOP for Operational Qualification (OQ) of Mixing Tanks – V 2.0

Procedure for Operational Qualification (OQ) of Mixing Tanks

Department	Quality Assurance (QA)/Validation/Engineering/Production
SOP No.	SOP/Ointment/133
Supersedes	V 1.0
Page No.	Page X of Y
Issue Date	[Insert Issue Date]
Effective Date	[Insert Effective Date]
Review Date	[Insert Review Date]

1. Purpose

The purpose of this Standard Operating Procedure (SOP) is to define the process for conducting Operational Qualification (OQ) of mixing tanks in ointment manufacturing. This ensures that the mixing tanks operate consistently and reliably within specified parameters under normal operating conditions.

2. Scope

This SOP applies to all personnel in the Quality Assurance (QA), Validation, Engineering, and Production departments responsible for performing and documenting Operational Qualification (OQ) for mixing tanks.

3. Responsibilities

QA Officer: Ensures compliance with OQ protocols.
Validation Team: Develops and executes OQ protocols.
Engineering Team: Supports testing and calibration of mixing tanks.
Production Supervisor: Ensures adherence to qualification testing procedures.
QA Manager: Approves OQ reports and ensures documentation accuracy.

4. Accountability

The QA and Validation Managers are accountable for ensuring that Operational Qualification (OQ) is conducted as per GMP, FDA, ICH, and WHO guidelines.

5. Procedure

5.1 Preparation for Operational Qualification (OQ)

Ensure that Installation Qualification (IQ) has been successfully completed.
Review and approve the Operational Qualification Protocol.
Verify the availability of calibrated test instruments.
Assign trained personnel to conduct the OQ tests.

5.2 Execution of Operational Qualification (OQ)

5.2.1

Functional Testing

Power on the mixing tank and ensure proper startup sequence.
Verify the functionality of control panels, alarms, and safety features.
Ensure emergency shutdown mechanisms work as expected.

5.2.2 Performance Testing

Run the mixing tank under normal operating conditions.
Test and verify:
- Agitation speed and RPM control
- Temperature regulation within specified limits
- Homogeneity of test batches
- Heating and cooling efficiency
Document all performance parameters.

5.2.3 Repeatability and Consistency Testing

Conduct repeated test cycles to confirm consistent performance.
Ensure all test results meet predefined acceptance criteria.
Identify any operational deviations and document corrective actions.

5.3 Documentation and Approval

Record all OQ data in the Operational Qualification Log.
QA must review and approve OQ results before proceeding to Performance Qualification (PQ).
Maintain all records for regulatory audits.

6. Abbreviations

GMP – Good Manufacturing Practices
QA – Quality Assurance
OQ – Operational Qualification
IQ – Installation Qualification
PQ – Performance Qualification

7. Documents

Operational Qualification Protocol (Annexure-1)
Operational Qualification Log (Annexure-2)

8. References

ICH Q7 – Good Manufacturing Practice Guide
WHO Guidelines for Equipment Qualification
US FDA Guidance on Operational Qualification

9. SOP Version

Version 2.0

10. Approval Section

	Prepared By	Checked By	Approved By
Signature
Date
Name
Designation
Department

11. Annexures

Annexure-1: Operational Qualification Protocol

Equipment Type	Test Parameter	Acceptance Criteria
Mixing Tank	Agitation Speed	± 5% of set value
Mixing Tank	Temperature Control	± 2°C of setpoint

Annexure-2: Operational Qualification Log

Date	Equipment ID	Test Performed	Result	Reviewed By
01/02/2025	MIX-1001	Agitation Speed Test	Pass	QA Manager
02/02/2025	MIX-1002	Temperature Control Test	Pass	QA Manager

12. Revision History:

Revision Date	Revision No.	Details of Revision	Reason for Revision	Approved By
01/01/2024	1.0	Initial Version	New SOP	QA Head
01/02/2025	2.0	Updated SOP Format	Standardization of Document	QA Head