SOP Guide for Pharma

BA-BE Studies: SOP for Blinding and Unblinding Protocols in BA/BE Studies – V 2.0

BA-BE Studies: SOP for Blinding and Unblinding Protocols in BA/BE Studies – V 2.0

Standard Operating Procedure for Blinding and Unblinding Protocols in BA/BE Studies

Department BA-BE Studies
SOP No. SOP/BA-BE/028/2025
Supersedes SOP/BA-BE/028/2022
Page No. Page 1 of 13
Issue Date 17/04/2025
Effective Date 20/04/2025
Review Date 17/04/2026

1. Purpose

To define the standard procedure for the blinding and unblinding of treatment assignments in Bioavailability/Bioequivalence (BA/BE) studies, in order to maintain the integrity of the study and ensure unbiased assessment of results.

2. Scope

This SOP applies to all blinded or partially blinded BA/BE studies conducted under the sponsorship or management of the organization. It includes single-blind, double-blind, and investigator-blind study designs.

3. Responsibilities

4. Accountability

The Head of Clinical Research is accountable for ensuring that blinding is maintained according to the protocol and that any unblinding is adequately documented and justified.

5. Procedure

5.1 Study Design and Blinding Approach

  1. Refer to the approved protocol to determine the blinding type: single-blind, double-blind, or open-label.
  2. If applicable, define the blinding mechanism in the protocol and Annexure-1: Blinding Plan Summary.

5.2 Randomization and Blinding Code Preparation

  1. Generate randomization codes using validated software and maintain a sealed master list (Annexure-2).
  2. Label study drugs identically for active and reference treatments, as required.
  3. Maintain strict access control to randomization lists and drug code identifiers.

5.3 Implementation of Blinding at Site

  1. Provide site personnel with blinded kits without revealing identity or sequence.
  2. Ensure pharmacy or designated person dispenses according to randomization schedule.
  3. Record dispensation and administration details in Annexure-3: Blinding Compliance Log.

5.4 Monitoring and Maintenance of Blind

  1. Monitor blinding compliance during site visits and audits.
  2. Investigate any suspected or accidental unblinding events and document in Annexure-4: Unblinding Incident Report.

5.5 Emergency Unblinding

  1. Unblinding may only occur if knowledge of treatment is essential for subject safety.
  2. Document:
    • Reason for unblinding
    • Authorization obtained
    • Time and person unblinded
  3. Update Annexure-5: Emergency Unblinding Log and notify the sponsor and Ethics Committee immediately.

5.6 End-of-Study Unblinding

  1. Perform unblinding only after database lock and analysis plan finalization.
  2. Document and archive final unblinding summary (Annexure-6: Study Unblinding Summary Report).

6. Abbreviations

7. Documents

  1. Blinding Plan Summary – Annexure-1
  2. Randomization Code List – Annexure-2
  3. Blinding Compliance Log – Annexure-3
  4. Unblinding Incident Report – Annexure-4
  5. Emergency Unblinding Log – Annexure-5
  6. Study Unblinding Summary Report – Annexure-6

8. References

9. SOP Version

Version: 2.0

10. Approval Section

Prepared By Checked By Approved By
Signature
Date
Name
Designation
Department

11. Annexures

Annexure-1: Blinding Plan Summary

Study Code Blinding Type Blinded Parties Remarks
BE-037 Double-Blind Subject, Investigator Parallel design

Annexure-2: Randomization Code List

Subject ID Treatment Sequence Code
001 TR A102

Annexure-3: Blinding Compliance Log

Date Subject ID Dispensed By Verified By Remarks
16/04/2025 001 Technician A PI As per randomization

Annexure-4: Unblinding Incident Report

Date Subject ID Reason Impact Action Taken
17/04/2025 004 Label mix-up Excluded from PK Reported to QA

Annexure-5: Emergency Unblinding Log

Subject ID Unblinded By Date & Time Reason Authorization
008 PI 17/04/2025, 11:45 Severe reaction Medical Monitor

Annexure-6: Study Unblinding Summary Report

Study Code Total Subjects Unblinded Cases Remarks
BE-037 60 1 Emergency unblinding only

Revision History:

Revision Date Revision No. Details Reason Approved By
15/01/2022 1.0 Initial version Regulatory compliance QA Head
17/04/2025 2.0 Included emergency and end-of-study unblinding procedures ICH E6(R2) Alignment QA Head
Exit mobile version